Author Topic: Auto Initialization  (Read 527 times)

MorneW

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Auto Initialization
« on: September 20, 2016, 07:13:32 PM »
Is it possible to initialize the Twain Lib and automatically take the default selected scanner and also default settings instead of having the user select the scanner and settings?

mkaatr

  • Administrator
  • Full Member
  • *****
  • Posts: 115
  • Karma: +1/-0
    • View Profile
Re: Auto Initialization
« Reply #1 on: September 21, 2016, 05:12:29 AM »
Hi there...

Check the video here: http://mkasoft.com/easy-coding/35-access-twain-v3

MorneW

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Auto Initialization
« Reply #2 on: September 21, 2016, 07:58:10 PM »
This works for selecting a default scanner and not having to select it over and over again but is there a way for the scanning to automatically start, i.e. not having to select any scanning settings like flatbed or feeder, and those types of things

MorneW

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
Re: Auto Initialization
« Reply #3 on: September 22, 2016, 02:35:38 PM »
Any Feedback yet?

mkaatr

  • Administrator
  • Full Member
  • *****
  • Posts: 115
  • Karma: +1/-0
    • View Profile
Re: Auto Initialization
« Reply #4 on: September 28, 2016, 09:02:33 PM »
Sorry for the late response...

I haven't checked that yet. I will try to check it after work tomorrow.

yours sincerely

mkaatr

  • Administrator
  • Full Member
  • *****
  • Posts: 115
  • Karma: +1/-0
    • View Profile
Re: Auto Initialization
« Reply #5 on: September 29, 2016, 09:42:12 AM »
Any Feedback yet?

Hi there...

Sorry for the late reply...

Sadly the library does not support auto scanning. The problem is that I can't remember much of the library since I worked on translating it from C# from another guy and added very few improvement. You could always go back to the Twain Specification to see how that get done, but I am afraid I am being too busy to work on that for the last few months  :(.

yours sincerely